|
| Payment Method: | L/C, T/T |
| Projuct | i450 |
| General specifications | |
| Power requirements | Single phase AC220V 15A 50/60HZ |
| Air pressure requirements | ≥0.5MPa |
| Control system | WINDOWS 7+sonic soft-bodied |
| Contour size (L*W*H) | L1000*W1650*1680mm |
| Device ontology specification | |
| Working methods | Laser move |
| Laser type | UV/FAYB/C02/GR |
| PC | Industrial computer |
| System access | Access MES/SHOPFLOW/IMS/Intelligent Management System such as Non-Standard Customization |
| Positioning system | CCD+MARK location |
| Misplaced material identification function | Forward, Back and Wrong Board Recognition |
| Double sided printing | Built-in reprint mechanism, can realize double-sided carving, double-sided reading |
| High and low difference engraving | Configure the Z-axis to adjust automatically |
| On line reading function | Yes, after reading the code, the system can be saved locally or uploaded fine checksum |
| Sculpt PCB Dimensions | Min.50*50mm/max.460*400mm |
| Track width adjustment system | Automatic adjustments |
| Control system | PC+shaft chuck+servomotor |
| Direction of transmission | The interface can be left to right or right. If there is a turnover mechanism, it will not limit the flow direction |
| Permissible deformation of PCB | ＜3mm |
| Adapt to PCB thickness | 0.5-5mm |
| PCB Top Surface Passing Height | 55mm |
| PCB under-surface pass height | 45mm |
| Oorbital transfer velocity | 50-3000mm |
| Badmark recognition function | Automatic Identification Type "X", no carving |
| Soot disposal system | Standard soot processor, filter smoke and odor |
| Accuracy of Coding Position | ±0.1mm |
| Laser specification | |
| Wavelength | 355NM |
| Lasing power | 3W/5W/10W/20W |
| Print speed | 700 words/sec |
| Printing angle | 0-360° |
| Range of types of print | 105*105mm |
| Focal distance | 254mm |
| Corresponding line speed | Under 120m/min |
| Engrave content | 1D/2D Barcode, Numbers, characters, LOGO, Graphical, etc |
| Cooling method | Forced air cooling |
|
|
| Payment Method: | L/C, T/T |
| Projuct | i450 |
| General specifications | |
| Power requirements | Single phase AC220V 15A 50/60HZ |
| Air pressure requirements | ≥0.5MPa |
| Control system | WINDOWS 7+sonic soft-bodied |
| Contour size (L*W*H) | L1000*W1650*1680mm |
| Device ontology specification | |
| Working methods | Laser move |
| Laser type | UV/FAYB/C02/GR |
| PC | Industrial computer |
| System access | Access MES/SHOPFLOW/IMS/Intelligent Management System such as Non-Standard Customization |
| Positioning system | CCD+MARK location |
| Misplaced material identification function | Forward, Back and Wrong Board Recognition |
| Double sided printing | Built-in reprint mechanism, can realize double-sided carving, double-sided reading |
| High and low difference engraving | Configure the Z-axis to adjust automatically |
| On line reading function | Yes, after reading the code, the system can be saved locally or uploaded fine checksum |
| Sculpt PCB Dimensions | Min.50*50mm/max.460*400mm |
| Track width adjustment system | Automatic adjustments |
| Control system | PC+shaft chuck+servomotor |
| Direction of transmission | The interface can be left to right or right. If there is a turnover mechanism, it will not limit the flow direction |
| Permissible deformation of PCB | ＜3mm |
| Adapt to PCB thickness | 0.5-5mm |
| PCB Top Surface Passing Height | 55mm |
| PCB under-surface pass height | 45mm |
| Oorbital transfer velocity | 50-3000mm |
| Badmark recognition function | Automatic Identification Type "X", no carving |
| Soot disposal system | Standard soot processor, filter smoke and odor |
| Accuracy of Coding Position | ±0.1mm |
| Laser specification | |
| Wavelength | 355NM |
| Lasing power | 3W/5W/10W/20W |
| Print speed | 700 words/sec |
| Printing angle | 0-360° |
| Range of types of print | 105*105mm |
| Focal distance | 254mm |
| Corresponding line speed | Under 120m/min |
| Engrave content | 1D/2D Barcode, Numbers, characters, LOGO, Graphical, etc |
| Cooling method | Forced air cooling |
